Have any question? +964 (0) 726 521 7601 [email protected]

UOK A-Z index

M.Sc and Ph.D from University of Technology(Iraq)in Production and Metallurgy Engineering-Metallurgy Engineering. Head of Materials Engineering Department since 2007.
1- Advanced Materials.

2- Composites.

3- Corrosion.

4-Casting.

5-Laser Treatment.

6-Nanotechnology.

1-Engineering Materials.

2-Design and Selection of Materials.

3-Corrosion Engineering.

4-Metallurgy Engineering.

5-Manufacturing Processes.

6-Materials Testing

- Kadhim Mohammed Jasim, Sami Ibrahim Al-Rubaiey, Ali Sabea Hammood, The influence of laser specific energy on laser sealing of plasma sprayed yttria partially stabilized zirconia coating, Optics and Lasers in Engineering, (2012).

Impact Factor:1.838

2- Prof. Dr. Muhsin J. Jweeg , Asst. Prof. Dr. Ali S. Hammood and Muhannad Al-Waily, Experimental and Theoretical Studies of Mechanical Properties for Reinforcement Fiber Types of Composite Materials, International Journal of Mechanical & Mechatronics Engineering( IJMME)-IJENS Vol:12 No:04,(2012)

Impact Factor:0.6666

3- Ali Hammood and Zainab Radeef, Characterizations of Their Properties, Chapter 12 in Composite Materials and Their Properties , INTECH, Edited by Ning Hu.(2012)

4- Muhsin J. Jweeg1, Ali S. Hammood, and Muhannad Al-Waily, A Suggested Analytical Solution of Isotropic Composite Plate with Crack Effect, International Journal of Mechanical & Mechatronics Engineering( IJMME)-IJENS Vol:12 No:05,(2012).

Impact Factor:0.6666

5-Muhsin J. Jweeg1, Ali S. Hammood, and Muhannad Al-Waily, A Suggested Analytical solution of Orthotropic Composite Plate Structure with Crack Effect, International Journal of Mechanical Engineering (IJME),Sep. 2012.

Impact Factor:0.6666

6-Muhsin J. Jweeg1, Ali S. Hammood, and Muhannad Al-Waily, A Suggested Analytical Solution of Different Composite Plate Types with Crack Effect, Journal of Science and Technology, Vol.2 , No.8, 2012.

7- Kadhim Mohammed Jasim ,Ali Sabea Hammood, Laser Heat Treatment For Electron Beam Evaporation coating, Journal of Engineering and Technology, Vol.15-No. 11 1996.

8- Ali S. Hammood, and Muhannad Al-Waily, Ali Abd. Kamaz ,Effect of fiber orientation on the fatigue of glass-fiber reinforcement epoxy composite material, The Iraqi Journal for Mechanical and Materials Engineering, Vol.11-No. 2 , 2011.

9- Ali S. Hammood, and Muhannad Al-Waily ,Experimental and Analytical Study Of Tensile Properties For Hyper Composite Material, The Iraqi Journal for Mechanical and Materials Engineering, Vol.10-No. 1 2010.

10-Ali Sabea Hammood, A Study for some of Mechanical Behavior of Flame – Sprayed Coatings, Proceedings of The First Conference For Pure and Applied Sciences-University of Kufa, March 2008.

11- Ali S. Hammood, Laser Surface Treatment of High Speed Steel ,The Iraqi Journal for Mechanical and Materials Engineering ,Vol.6-No. 5 2000.

12-Talib K. Ibrahim, Ali S. Humod, Rapid Solidification processing of Al-3 wt.% Mg Alloy ,Journal of Engineering and Technology ,Vol.25-No. 10 2007.

13- Mohammed Jasim Kadhim, Ali Sabea Humod, The corrosion of cupronickel alloys in 3.5% sodium chloride & ammonium nitrate solution, Al-Kufa Journal , Pure And Applied Sciences, Vol.8-No. 2 , 2007.

14 - Ali S. Humod, Mohammed J. Kadhim, The Effect of Homogenization on Microstructure Features and Corrosion Behavior of Cast Cupronickel Alloys, Al-Kufa Journal – Pure And Applied Sciences, Vol.8-No. 1, 2007.

15 -Ali Sabea Humod, Preparation of Melt-Spun Al-4.5%Cu Ribbons ,Babylon University Journal Vol.10-No. 5 , 2005.

16 -Mohammed J. Kadhim, Ali S. Humod Foundry Characteristics & Corrosion Behaviour of a Cupronickel Alloys, The Iraqi Journal for Mechanical and Materials Engineering, Vol.5-No. 1 , 2005.

17- Ali Sabea Humod, Analysis of Factors Influencing the Plasma Sprayed Layer Qualities, Babylon University Journal– Pure And Applied Sciences, Vol.6-No. 5 2000.

18-Kadhim Mohammed Jasim, Ali Sabea Hammood,Laser Heat Treatment for flame spray coating, Al-Anbar University Journal, January 1999.

19- Ali Sabea Hammood, Study of Hardness for carbon Steel, First Kufa University Scientific conference, April 1996.

20- Kadhim Mohammed Jasim, Ali Sabea Hammood, Pulse laser Surface Treatment of Plasma Sprayed Coatings, Journal of Engineering and Technology, Vol.19-No. 3 2000.

21- Kadhim Mohammed Jasim, Ali Sabea Hammood, Laser Heat Treatment For Electron Beam Evaporation coating, Journal of Engineering and Technology, Vol.15-No. 11 ,1996.

22- Talib K. Ibrahima, Falih Hasan Hamza, Ali Sabea Hammood ,Preparation of Ultra Fine Powder by Low Power CO2 Laser ,Journal of Engineering and Technology Vol.19-No. 6, 2000.

23- Ali S. Hammood and Haider Mahdi Lieth ,A Study the Effect of Retained Austenite on Fatigue Life of Austempering Ductile Iron by Using Artificial Neural Networks, International Journal of Current Engineering and Technology,

ISSN 2277 – 4106, Vol.3, No.5 (December 2013).

24- Asst. Prof. Dr. Ali S. Hammood, Haider Mahdi lieth, Development Artificial Neural Network Model to Study the Influence of Oxidation Process and Zinc-Electroplating on Fatigue Life of Gray Cast Iron, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:12 No:05 October 2012.

25- Ahmad. K. Jassim, Ali S. Hammood ,Sustainable Manufacturing Process for Bulk Metallic Glasses Production Using Rapid Solidification with Melt16 Spinning Technique2014 International Conference on Material Science and Material Engineering, March 14-16 March,2014,Chicago, Illinois, USA.

26- Ahmad. K. Jassim, Ali S. Hammood, Single Roll Melt Spinning Technique Applied to Produce Micro Thickness Rapid Solidified Ribbons Type 5083 (Al-Mg) alloy, , PAPER ID: 201404-P00129, International Parallel Conferences on Researches in Industrial & Applied Sciences, April, 25th & 26th 2014; Dubai, UAE.

27- Ahmad. K. Jassim, Ali S. Hammood, Production of Al-Mg alloy Ribbons by Using Single Roller Wheel Melt Spinning as a Non-Conventional Forming Technology, Basra International Conference of Mechanical Engineering, April- 2014.

28- Ali S. Hammood, Ahmad. K. Jassim, Forming Technology to Produce Very Thin 5052 Al-alloy Ribbons by Direct Casting from Liquid State, International Journal of Mechanical & Mechatronics Engineering( IJMME-IJENS )Vol:14 No:02,April 2014.

© University of Kufa· All rights reserved·