Have any question? +964 (0) 726 521 7601 [email protected]

UOK A-Z index

1976 1979 Laboratory Engineer Military Engineering College (MEC), Iraq 1979 1981 Studying French Scientific Language Cavilam and Ecole of Chemical Engineering, France 1981 1982 Research Student (DEA diploma) University of Pierre and Marie Curie, France 1982 1985 Research Student (Doctor Engineer Diploma) University of Pierre and Marie Curie, France 1985 1989 Member of Academic Staff of Mechanical Engineering Department MEC, Iraq 1989 1998 Responsible for Quality Control, Selection of Materials, and Heat Treatments Ministry of Industry, Iraq 1998 2003 Head of Metallurgy and Production Engineering Department MEC, Iraq 23 March 2002 Promotion to a Degree of Assistance Professor in Engineering Metallurgy MEC, Iraq 2003 2004 Member of Academic Staff of Mechanical Engineering Department Al-Rashid College, University of Technology, Iraq 2004 2005 Member of Academic Staff of Materials Engineering Department University of Technology, Iraq 18 May 2005 14 Dec. 2011 Head (Dean) of Materials Engineering Department University of Technology, Iraq 7 August 2011 Promotion to a Degree of Professor in Engineering Metallurgy University of Technology, Iraq 14 Dec. 2011 17 September 2013 Member of Academic Staff of Materials Engineering Department University of Technology, Iraq 7 August 2011 Promotion to Professor Degree in Engineering Metallurgy University of Technology, Iraq May 2013 Rank of the first Professor in materials engineering department for scholar year 2012-2013 University of Technology, Iraq 1985 Till present Supervision on 3 diploma 7 PhD and 23 MSc research students Technology and Babylon Universities, Iraq 17 September 2013 Till present Dean of Engineering Faculty University of Alkufa,Iraq
1- Heat Treatment and Phase Transformation of Metallic Materials and

their Alloys.

2-Low and High Cycles Fatigue of Metallic Materials.

3-Mechanical properties of Composite Materials.

4-Wear and Corrosion of Metallic Materials.

5-Failure Examination of Metallic Materials by SEM.

6- Powder Metallurgy.

7- Nanotechnology.

8- Functionally Graded Materials.

9- Welding Metallurgy.

1- Heat Treatment of Metallic Materials.

2- Phase Transformation of Metallic Materials.

3- Powder Metallurgy.

4- Welding Metallurgy.

5- Characterization of Metallic Materials.

6- Physical Metallurgy of Steel.

7- Non Destructive Testing.

1992______________________________________________________

1- Fatigue crack propagation in high strength steel.

Dr. Ali H. ATAIWI, Dr. H.J. Mohamed AL Alkawi

Journal of Military Engineering College, No. 10, 1992.

2000___________________________________ __________________

2-Effect of grain size of fused Alumina on physical and mechanical properties of

grinding wheels.

Dr. Ali H. Ataiwi, Dr. Fadhil A. Chyad, Eng.Uday M. Al-Naib Proc.

of the MCE 3rd Eng. SCI. Con.2000.

3-The effect of binder materials on the physical and mechanical properties of

grinding wheels. Dr. Ali Ataiwi , Dr. Fail A chyad, Eng

UdayM.Al-Naib.

1st conference on Ceramic Materials and their Engineering Applications, Feb.

24, 2000, Military Engineering College (MMC)

2002____________________________________________________________

4-Effect of annealing temperature and time on mechanical properties and

deep drawing of two types of brasses.

Dr. Ali H. Ataiwi +Abass A. Saleh. Journal of Military Engineering

College, No.22, 2002, Iraq.

5-The determination of the variables of high response on the anodizing of

Aluminum- Magnesium Alloy 5052 (Statically Analysis).

Dr Nahidh W. Kaseer, DrAli Hussein Ataiwi , and Talib M. Naieff , Iraqi

journal of chemical and petroleum engineering. Vol.3,No.1, March 2002.

6-Anodizing of Al- Mg Alloy 5052.

Dr.Nahidh W. Kaseer, Dr. Ali H. Ataiwi , Talib M. Naif, Iraqi journal of

Chemical & Petroleum Engineering, Vol . 4, No. 4, 2002.

2004__________________________________________________________

7-Production of maraging steel from scrap and improving the mechanical

properties by heat treatment.

Dr. Ali H. Ataiwi, Dr. Munther M. Radhy A- Kubisy. Journal of

Engineering and Development vol.8, No.2, June 2004.

2005_______________________________________________________

8-Wear mechanism in electro less Nickel plating.

Dr. Ali H. ATAIWI, Dr. Mohammed M. Hamady, Eng. Sondus Noori.

Engineering and Technology Journal, University of Technology,

Vol. 24 No 1, 2005.

2007__________________________________________________________

9- Effect of Zn% and Thermo mechanical Treatments on the Mechanical

Properties of Al-Zn-Mg Aloys.

Dr. Ali H.Ataiwi

Eng. & Tech. Journal, University of Technology .Vol. 25 No 7, 2007.

2008____________________________________________________________

10- Effect of some processing parameters on arc sprayed coating.

Dr. Ali H. Ataiwi

Eng of Tech. Journal, University of Technology .Vol. 26 No12, 2008.

2009______________________________________________________________

11- Study of hardness, wear, and corrosion resistance of ZrO2ceramic coats

Prepared by spray pyrolysis method.

Dr. Ali H. Ataiwi, Dr .Alla A. Abdul-Hamid.

Presented in the1st Scientific Engineering Conference 17-18 May

009, Paper Code: MAE1, Engineering College, Univ. of Babylon, Iraq.

12- Study of Structure properties of ZrO2 ceramic coats prepared by spray

pyrolysis Method.

Dr. Ali H.Ataiwi, Dr .AllaA.Abdul-Hamid.

Eng. &Tech. Journal, University of Tech, Iraq. Vol. 27, No 16, 2009

2011______________________________________________________

13-Studying and Modeling the Effects of Quartz Addition and Heat

Treatment on Corrosion Properties of Ceramic Coating. .

Dr Ali H. Ataiwi1;Dr. Ibtihal A. Mahmood2; Eng. Jabbar H. Mohmmed.

Eng. &Tech. Journal, Vol.29, No.12, 2011

2012____________________________________________________________

14- Effect of Different Coating Techniques with Al on the Corrosion

Behavior of Stainless Steel 316L in Seawater.

Dr. Ali H. Ataiwi, Dr. Abdul Khaliq F. Hamood, Dr Ranna A. Majed.

Al Nahrain University Journal for Science, Vol.15, No.3,

Month 9, 2012.

15- Preparing Polyester Bentonite Clay Nan composite and Study some of its

Mechanical Properties.

Dr. Ali H. Ataiwi, Dr. Alaa A. Abdul-Hamead.

Emirates Journal for Engineering Research (EJER), Engineering College,

UAE University, United Arab Emirates, issue 1,vol 17, June 2012.

16- Study the Effect of TiO2 Nano-Powder on some surface Properties of

TiO2 Thin Film Prepared on Stainless Steel.(baiomaterial)

Ali H. ATAIWI, Alaa A. Abdula-Hamead.

Iraqi Journal of Physics/ University of Baghdad No. 18 , Vol. 10, P.29,

October 2012.

17-Effect of Some Anti-inflammatory Drugs on Corrosion Behavior Implant

Biomaterials in Human Body Fluid. 2012.( Baiomaterial)

Dr. Khtan Khalaf Al-Khazraji, Dr. Ali H. ATAIWI, Dr.Rana, Eng.Zena

Eng. & Tech. Journal, Vol. 30, No. 6, 2012.

18-Fabrication and Characterization of Stepwise Cu/Ni Functionally Graded

Materials,

Dr. Ali H. ATAIWI , Dr. Alla A. Atia , Eng. Noor Shareef & Malchasi

FREIBERGER FORSCHUNGSHEFTE ,A 891 Maschinenbau 2012,Page31

Germany , (E-mail: [email protected] ).

19-Development and improvement the properties of ceramic coatings for

heat exchanger panels used in power plants.

Dr. Ali H. Ataiwi1;Dr. Ibtihal A. Mahmood2; Eng. Jabbar H. mohmmed

Presented and published in comprehensive conference for the thesis of universities, on 7-8 May 2012.

20-Effect of Tobacco Smoking on the Corrosion Behavior of Three Dental

Alloys in Artificial Saliva.( Biomaterial)

Dr. Ali H. ATAIWI ,Dr. Rana A. Majed, Eng. Ali A. Muhsin.

Tikrit Journal of Dental Sciences, No. (2), Vol.(2), 2012 PP.145-153

2013______________________________________________________________

21- Effect of Laser Surface Modification on the Corrosion Resistance of Dental

Alloys in Artificial Saliva Containing Alcoholic Beverages. ( Biomaterial)

Dr. Ali Hussein ATAIWI, Dr. Rana A. Majed,Eng.Ali A. Muhsin.

Accepted to be published in Iraqi Journal of Laser by its acceptation

letter No. 517 on 23/01/2013.

2014________________________________________________________________

22- Mechanical Behavior of Thick Hallow Cylinder Made of Functionally

Graded Material.

Dr. Ali Hussein ATAIWI, DR. Alla a. Atia, Eng. Maroin Abass Madlom.

Accepted to be published by Eng.& Tech. Journal under No.1693 on 17-

6-2013.

(Research No. 6411)

23- Studying and Modeling the Effects of Quartz Addition and Heat

Treatment on Mechanical Properties of Glass-Ceramic Coating.

Dr Ali H. Ataiwi1;Dr. Ibtihal A. Mahmood2; Eng. Jabbar H. Mohmmed.

Accepted to be published in Eng. &Tech. Journal (Letter no. 2103 on

27/8/2013).

24- Wear Resistance of a New glass Ceramic Coating.

Dr. Ali Hussein ATAIWI, Dr. Ibtihal A. Mohmood, Eng. Jabbar H. Mohmmed.

Accepted to be published by Eng.& Tech . Journal ( letter no. 1950 on

29/7/2013).

25- Study the Fatigue Behavior of Friction Stir Welded Joints of Dissimilar Al

Alloys (2024-T4 & 7020-T6).

Dr. Ali Hussein Ataiwi, Dr. Muna K. Abass, Ahmed Amid

Accepted to be published by Eng.& Tech. Journal under No.1311 on 9-5-

2013.(Research No. 6351).

26- Investigation to Fatigue Behavior and Fractography of Dissimilar

Friction Stir welded Joints of Aluminum Alloys (7075-T6 and 5052-

H34)

Eng.Ahmed Amid, Dr. Muna K. Abass, Dr Ali H. ATAIWI, Sanjeev K. Khanna

Dept.of Mechanical & Aerospace Engineering, University of Missouri.

Columbia, MO 65211, USA, Bharat Jashti, Christian Widener,Dept. of Materials

and Metallurgical Engineering, South Dakota School of Mines and Technology

Rapid City, SD-57701, USA

Accepted by and presented in 2nd International Conference on Nano and Materials Engineering ICNME

2014 - 1 -, 2-3 April, 2014, Dubai, UAE, http://www.icnme.org

© University of Kufa· All rights reserved·